Asus L3Tp - Manual (Page 18)

18
2
Knowing the Parts
Left Side
Refer to the diagram below to identify the components on the left side of the Notebook PC.
Kensington ® Lock Port
The Kensington ® lock port allows the Notebook PC to be secured using Kensington ® compatible
Notebook PC security products. These security products usually include a metal cable and lock that
prevent the Notebook PC to be removed from a fixed object. Some security products may also include
a motion detector to sound an alarm when moved.
Volume Control
This volume control only adjusts the Notebook PC’s hardware audio output level. It does not control
the OS audio level. If the OS audio is set to 50% and this volume control is turned to maximum, you
will only hear 50% output overall. It is recommended that you turn the OS audio level to mamimum in
order to maximize the control levels of this volume control.
Reset Button
The reset button is used for resetting the Notebook PC if <CTRL><ALT><DEL> or turning OFF the
power does not respond. To use this function, momentarily depress the button within the hole with a
pen or paper clip and the Notebook PC will restart. Do not use a pencil since the tip may break off in the
hole.
DC Power Input Jack
The supplied power adapter converts AC power to DC power for use with this jack. Power supplied
through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent
damage to the Notebook PC and battery pack, always use the supplied power adapter.
Floppy Disk Drive and Floppy Eject
This is a standard 1.44MB floppy disk drive with Japanese 3-mode floppy support. Floppy disk activity
should be seen through the activity LED above the keyboard. Unlike desktop PC floppy disk drives, the
eject button of the Notebook PC is on top of the opening to allow easy floppy ejection from the top.
DC IN
K
reset
DC IN
K
DC Power
Input Jack
Floppy Disk Drive
Volume Control Reset Button
Kensington ®
Lock Port
Air Vent Air Vent