Asus L3Tp - Manual (Page 44)

44
4
Using the Notebook PC
DC IN
Docking cable
Press both sides to release
Triangular icon or
brand name faces up.
PortBar II
(rear view)
Cable storage
holder
PortBar II Accessory (Optional on selected models)
If you require a simple inexpensive docking solution, just use a PortBar to connect your desktop devices
and then quickly connect or disconnect all the devices through a single easy-to-use connector. The
PortBar’s Plug & Play feature allows it to be connected or disconnected while the Notebook PC is ON
or OFF (hot-dockable). Except for the device connected to the serial port, other devices should function
normally while hot-dockable. If any device does not function or cannot be seen, you can refresh devices
by: (1) right clicking the “My Computer” icon on the desktop, (2) selecting “Properties” on the menu,
(3) selecting the “Device Manager” tab, (4) clicking the “Refresh” button, and (5) clicking “OK” button
to finish.
USB Port 2
Monitor Port
PS/2 Mouse or Keyboard
LAN (RJ-45)
USB Port 1
Parallel Port DC IN
50W DC Power Pass Through
to the Notebook PC
PortBar II
(front view)
Triangular icon or
brand name faces up.
60W DC Power Pass Through
to the Notebook PC
Note: Your Notebook
PC’s power adapter
will only fit into the
60W or the 50W jack
(not both) depending
on the model.
Note: Not all models support the PortBar II.