Asus AP6000 - Manual (Page 21)

AP6000 Hardware Reference Guide 21
II. System Components
II. Components
Motherboard Securing
Remove the fan module before installing or removing the motherboard.
All screws are necessary to provide the needed stabilization to support all
the motherboard expansion items.
Spacer Mounts
These spacers are used to give added support to the motherboard. Make
sure that these are placed in the exact locations shown here for the
P2B-DS motherboard, do not place them in other locations or else dam-
age may occur to the motherboard.
Installed P2B-DS motherboard
Spacer Mount
(four required)
Motherboard spacer mounts
Motherboard