Asus P5WDG2 WS Professional User Manual

Page 92

Advertising

4 - 1 6

C h a p t e r 4 : B I O S s e t u p

PIO Mode [Auto]

Selects the PIO mode.
Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]

Configure SATA As [Standard IDE]

Sets the configuration for the Serial ATA connectors supported by the
Southbridge chip.

The AHCI allows the onboard storage driver to enable advanced Serial ATA
features that increases storage performance on random workloads by
allowing the drive to internally optimize the order of commands.

If you want to create a RAID 0, RAID 1, RAID 10, and RAID 5, or the Intel

Matrix Storage Technology configuration from the Serial ATA hard disk
drives, set this item to [RAID].

If you want to use the Serial ATA hard disk drives as Parallel ATA physical
storage devices, keep the defaul setting [Standard IDE].

IDE Configuration

Configure SATA As

[Standard IDE]

Onboard IDE Operate Mode

[Enhanced Mode]

Enhanced Mode Support On

[S-ATA]

IDE Detect Time Out (Sec)

[35]

When in AHCI/RAID
mode SATA
controller is
forced to Native
mode.

4.3.6

IDE Configuration

The items in this menu allow you to set or change the configurations for
the IDE devices installed in the system. Select an item then press <Enter>
if you want to configure the item.

Advertising

Popular Brands

Popular manuals