Asus RX3041_B - Manual (Page 15)

15 Chapter : Setting up the hardware RX01_B
Using QIS without auto-detection
To use QIS to manually setup your newtork:
1. Launch your web browser and type in http://192.168.1.1 on the address bar.
. Click QIS from the navigation menu. Select your connection type from these
types of ISP services: Automatic IP, PPPoE, Static IP, PPTP, and L2TP.
Select your next preferred task from any of these options:
1. Going to Internet: Click to go online and start surfing websites,
chatting, or accessing e-mail.
. Advanced Setting page: Click to go to the router’s Advanced Setting
page and configure more options.
. Add to Favorites: Click to add the router’s web interface to your
Favorites.
Important: Obtain the necessary information about your Internet connection type from your ISP.
Note: If you choose options  and , you will need to log in to the web GUI. For more details,
refer to the section Configuring via the web GUI in this user manual.
. Click Next and key in the necessary information for your ISP connection type.
e7_rx01b_contents.indd 15 /19/1 5:51: PM