Asus RX3041_B - Manual (Page 17)

17 Chapter 3: Configuring the clients RX3041_B
Accessing the router
Setting up an IP address for wired clients
To access the ASUS Router, you must have the correct TCP/IP settings on your
wired clients. Ensure that the clients’ IP addresses are within the same subnet as
the ASUS Router.
By default, the ASUS Router makes use of DHCP to automatically assign IP
addresses to the clients on your network.
In some instances, you may want to manually assign static IP addresses on some
of the clients or computers in your network rather than automatically receiving IP
addresses from your router.
Follow the instructions below that correspond to the operating system installed on
your client or computer.
In Router mode, if you want to manually assign an IP address to your client, we recommend that
you use the following settings:
• IP address: 19.18.1.xxx (xxx can be any number between  and 5. Ensure that the IP
address is not used by another device)
• Subnet Mask: 55.55.55.0 (same as the ASUS Router)
• Gateway: 19.18.1.1 (IP address of the ASUS Router)
• DNS: 19.18.1.1 (ASUS Router) or assign a known DNS server in your network
3
Configuring the
network clients
e7_rx01b_contents.indd 17 /19/1 5:51: PM