Asus K8U-X - Manual (Page 26)

Chapter 1: Product Introduction 1-16
1.9 Jumpers
The onboard jumpers supply some configurations about special functions,
in order to satisfy usersʼ requirements.
Except when clearing the RTC RAM, never remove the cap on the
jumper default position. Removing the cap will cause system boot failure!
1. Clear RTC RAM (CLRTC)
This jumper allows you to clear the Real Time Clock (RTC) RAM in CMOS.
You can clear the CMOS memory of date, time, and system setup parameters
by erasing the CMOS RTC RAM data. The RAM data in CMOS, that include
system setup information such as system passwords, is powered by the
onboard button cell battery.
To erase the RTC RAM:
1. Turn OFF the computer and unplug the power cord.
2. Move the battery away from motherboard.
3. Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep
the cap on pins 2-3 for about 5~10 seconds, then move the cap
back to pins 1-2.
4. Plug the power cord and turn ON the computer.
5. Hold down the <Del> key during the boot process and enter
BIOS setup to re-enter data.
K
8 U
-X
®
K8U-X Clear RTC RAM
CLRTC
Normal Clear CMOS
(Default)
1
2 2
3
You do not need to clear the RTC when the system hangs due to
overclocking. For system failure due to overclocking, use the C.P.R.
(CPU Parameter Recall) feature. Shut down and reboot the system so
BIOS can automatically reset parameter settings to its previous values.