Asus GigaX2048 - Manual (Page 67)

55
GigaX2024/2048 L2 Managed Switch User Manual
5.1.1 Boot ROM Command Mode
During the POST process, you can enter a Boot ROM Command mode by
pressing <ENTER> key as shown in Figure 50.
Figure 50 shows dual images in the switch. One firmware is in Slot 0 and the
other firmware is in Slot 1. The later version will be selected to boot the system
automatically.
Enter
<?> key to show the help messages for all available commands.
Although the commands are helpful in some situation, we
STRONGLY suggest users not to use them if you donʼt know the
command function.
Figure 68. Boot ROM Command Mode
5.1.2 Boot ROM Commands
Type <?> in the boot mode to display the valid commands list.
Warning