Asus GigaX2048 - Manual (Page 87)

75
GigaX2024/2048 L2 Managed Switch User Manual
[Destination Port] [Type/Port]
[Protocol] [ICMP/TCP/UDP/ANY]
[Add]
User can add a new IP rule associated to a filter set. These filter rule works with
ICMP, TCP or UDP protocols with permit or deny options. User can also specify
the IP address (source or destination) and port number of the filter rule using the
CLI command dstip/srcip and dstport/srcport, respectively.
CLI command: filter rule new <set id> <rule id> <protocol: ICMP/TCP/UDP/
any> <action: permit/deny>
CLI command: filter rule dstip <set id> <rule id> <type: (any/[ip] [subnet])>
CLI command: filter rule srcip <set id> <rule id> <type: (any/[ip] [subnet])>
CLI command: filter rule dstport <set id> <rule id> <type: (any/[port])>
CLI command: filter rule srcport <set id> <rule id> <type: (any/[port])>
[Rule Mode] [MAC Rule]
[Action] [Permit/Deny]
[Source MAC]
[Destination MAC]
[Modify]
Allows user to modify the MAC filter rule.
CLI command: filter rule modify <set id> <rule id> <protocol: ICMP/TCP/
UDP/any> <action: permit/deny>
CLI command: filter rule dstmac <set id> <rule id> <type: (any/[mac
address])>
CLI command: filter rule srcmac <set id> <rule id> <type: (any/[mac
address])>
[Rule Mode] [IP Rule]
[Action] [Permit/Deny]
[Source IP] [Type/IP, Mask]
[Destination IP] [Type/IP, Mask]
[Source Port] [Type/Port]