Asus KCMR-D12 - Manual (Page 105)

ASUS KCMR-D12 5-9
6. Press <Ctrl> + <Y> again and enter the LD name. Press <Enter> to continue.
FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
[ LD Define Menu ]
[ Keys Available ]
[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option
[Ctrl+Y] Save [ESC] Exit
[ Drives Assignments ]
LD No LD Name
LD 1 Logical Drive 1
Stripe Block 128 KB
Gigabyte Boundary ON
Read Policy Read Cache
RAID Mode Drv
RAID 1 2
Initialization Fast
Write Policy WriteBack
Port:ID Drive Model Capabilities Capacity(GB) Assignment
01:01 HDTXXXXXXXXXXXX SATA 3G 250.05 Y
02:01 HDTXXXXXXXXXXXX SATA 3G 250.05 Y
03:01 HDTXXXXXXXXXXXX SATA 3G 250.05 N
04:01 HDTXXXXXXXXXXXX SATA 3G 250.05 N Enter the LD name here: XXXX
7. All the data on the selected disk drives will be deleted. Press <Ctrl> + <Y> to
continue.
FastBuild (tm) Utility (c) 2004-2010 Promise Technology, Inc.
[ LD Define Menu ]
[ Keys Available ]
[↑] Up [↓] Down [PaUp/PaDn] Switch Page [Space] Change Option
[Ctrl+Y] Save [ESC] Exit
[ Drives Assignments ]
LD No LD Name
LD 1 Logical Drive 1
Stripe Block 128 KB
Gigabyte Boundary ON
Read Policy Read Cache
RAID Mode Drv
RAID 1 2
Initialization Fast
Write Policy WriteBack
Port:ID Drive Model Capabilities Capacity(GB) Assignment
01:01 HDTXXXXXXXXXXXX SATA 3G 250.05 Y
02:01 HDTXXXXXXXXXXXX SATA 3G 250.05 Y
03:01 HDTXXXXXXXXXXXX SATA 3G 250.05 N
04:01 HDTXXXXXXXXXXXX SATA 3G 250.05 N
Fast Initialization Option has been selected.
It wil erase the MBR data of the disks.
<Press Ctrl-Y Key if you are sure to erase it>
<Press any other key to ignore this option>