Asus S1B - Manual (Page 18)

18
Knowing the Parts
IEEE
1394 Port
1394
Left Side
Refer to the diagram below to identify the components on the left side of the Notebook PC.
DC Power Input Jack
The supplied power adapter converts AC power to DC power for use with this jack. Power supplied
through this jack supplies power to the Notebook PC and charges the internal battery pack. To prevent
damage to the Notebook PC and battery pack, always use the supplied power adapter.
Ai-Box Port
The Ai-Box port is for connection to an optional Ai-Box to provide an external IDE interface for IDE
storage devices. More details given later.
PC Card (PCMCIA) Socket and Eject
One PCMCIA 2.1 compliant socket for one type I/II PC card is available. The socket supports 32-bit
CardBus. This allows accommodation of all Notebook PC expansion options such as memory cards,
ISDN, SCSI, Smart Cards, and wireless network adapters.
IEEE1394 Port
IEEE1394 is a high speed serial bus like SCSI but has simple connections and hot-plugging capabilities
like USB. The interface IEEE1394 has a bandwidth of 100-400 Mbits/sec and can handle up to 63 units
on the same bus. It is very likely that IEEE1394, together with USB, will replace Parallel, IDE, SCSI,
and EIDE ports. IEEE1394 is also used in high-end
digital equipment and should be marked “DV” for
Digital Video port.
USB Ports
Universal Serial Bus (USB) supports many USB compatible devices such as keyboards, pointing de-
vices, video cameras, modems, hard disk drives, printers, monitors, and scanners connected in a series
up to 12Mbits/sec. USB allows up to 127 devices to run simultaneously on a single computer, with
peripherals such as USB keyboards and some newer monitors acting as additional plug-in sites or hubs.
USB supports hot-swapping of devices so that peripherals can be connected or disconnected while the
Notebook PC is ON.
Fast IrDA
Port PC Card (PCMCIA) Socket
DC Power
Input Jack 2 USB Ports
DC IN 1394
DC IN
AI-Box Port