Asus S1B - Manual (Page 47)

47
Using the Notebook PC
DC IN
Docking cable
Press both sides
to release
Triangular icon
or brand name
faces up.
PortBar II
(rear view)
Cable storage holder
PortBar II Accessory (Optional)
If you require a simple inexpensive docking solution, just use a PortBar to connect your desktop de-
vices and then quickly connect or disconnect all the devices through a single easy-to-use connector.
The PortBar’s Plug & Play feature allows it to be connected or disconnected while the Notebook PC is
ON or OFF (hot-dockable). Except for the device connected to the serial port, other devices should
function normally while hot-dockable. If any device does not function or cannot be seen, you can
refresh devices by: (1) right clicking the “My Computer” icon on the desktop, (2) selecting “Properties”
on the menu, (3) selecting the “Device Manager” tab, (4) clicking the “Refresh” button, and (5) click-
ing “OK” button to finish.
Continued on next page.
USB Port 2
Monitor Port
PS/2 Mouse or Keyboard
LAN (RJ-45)
USB Port 1
Parallel Port
DC IN
50W DC Power Pass Through
to the Notebook PC
PortBar II
(front view)
Triangular icon or
brand name faces up.
60W DC Power Pass Through
(not supported on this Notebook PC)