Asus RS120-E5/PA2 - Manual (Page 99)

ASUS RS120-E5/PA2 5-33
Password.Check.[Setup]
When set to [Setup], BIOS checks for user password when accessing the Setup
utility. When set to [Always], BIOS checks for user password both when accessing
Setup and booting the system. Configuration options: [Setup] [Always]
Exit.&.Save.Changes
Select this option then press <Enter>, or simply press <F10>, to save your changes
to CMOS before exiting the Setup utility.
When a confirmation window appears, select [OK] then press <Enter> to save your
changes and exit Setup. If you wish to cancel the command, select [Cancel] then
press <Enter> to return to the Exit menu.
Exit.&.Discard.Changes
Select this option then press <Enter> to exit the Setup utility without saving your
changes.
When a confirmation window appears, select [OK] then press <Enter> to discard
your changes and exit Setup. If you wish to cancel the command, select [Cancel]
then press <Enter> to return to the Exit menu.
If you made changes to any of the settings in the menus, pressing <Esc> does
not immediately exit this menu. A confirmation window appears and prompts you
to either save your changes or cancel the command. Select one of the options
from this menu to exit.
5.8 Exit menu
The Exit menu items allow you to load the optimal or failsafe default values for the
BIOS items, and save or discard your changes to the BIOS items.
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Advanced Server Power Boot Exit
Exit system setup after
saving the changes.
F10 key can be used for
this operation.
Exit Options
Exit & Save Changes
Exit & Discard Changes
Discard Changes
Load Setup Defaults