Asus Z9PE-D16 - Manual (Page 93)

ASUS Z9PE-D16 Series 4-29
Enable/disable USB 2.0 (EHCI)
Support.
EHCI Controller 1 [Enabled]
EHCI Controller 2 [Enabled]
Rear USB #1 [Enabled]
Rear USB #2 [Enabled]
Onboard USB #3 [Enabled]
Onboard USB #4 [Enabled]
Onboard USB #5 [Enabled]
Onboard USB #6 [Enabled]
Onboard USB #10 [Enabled]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
USB Ports Configuration
4.4.10 Trusted Computing
Allows you to enable or
disable BIOS support for
security device. O.S. will
not show Security Device.
TCG EFI protocol and INT1A
interface will not be
Configuration
TPM Support [Enabled]
Current Status Information
No Security Device Found
TPM Support [Enabled]
Allows you to enable or disable the TPM support.
Configuration options: [Disabled] [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.15.1219. Copyright (C) 2011 American Megatrends, Inc.
EHCI Controller 1/2 [Enabled]
Allows you to enable or disable USB (EHCI) Support.
Configuration options: [Disabled] [Enabled]
Rear USB #1 and #2 [Enabled]
Allows you to enable or disable rear USB #1 and #2.
Configuration options: [Disabled] [Enabled]
Onboard USB #3/#4/#5/#6/#10 [Enabled]
Allows you to enable or disable Onboard USB #3 / #4 / #5 / #6 / #10.
Configuration options: [Disabled] [Enabled]
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced