Asus RS500A-S6/PS4 User Manual
Page 38
Advertising
Chapter 2: Hardware setup
2-20
7. Connect the data cables, by
numerial order, to the SAS
connectors labeled SAS1-4 (blue)
on the motherboard.
6. Remove the data cables connected
to the SATA connectors (black) on
the motherboard.
5. Insert the RAID card into the PIKE
RAID card slot. Ensure that it is
completely seated on the PIKE
RAID card slot.
8. Move the pre-installed SGPIO
cable from the SGPIO3 connector
to the SGPIO1 connector on the
motherboard as shown.
Advertising