Asus RS500-E6/PS4 User Manual
Page 37
Advertising
2-19
ASUS RS500-E6/PS4
Installing i Button (for PIKE 1078 only)
Follow the steps below to install an optional i Button on your motherboard.
1. Locate the I Button slot on the
motherboard.
2. Snap the I Button in place.
5. Connect the data cables, by
numerial order, to the SAS
connectors labeled SAS1-4 (red)
on the motherboard.
The heatsink on PIKE 1078 might interfere the components on the expansion
card. Ensure that the height of the components is less than 6.7 mm.
6. Set the SGPIO_SEL1 jumper on
the backplane to pin 2-3 when
connecting data cables to the SAS
connectors on the motherboard.
Advertising