11 apm setting, 11 apm setting -29, Restore ac power loss [last state – Asus Z9NR-D12 User Manual
Page 93: Power on by pcie [disabled, Power on by ring [disabled, Power on by rtc [disabled
ASUS Z9NR-D12
4-29
4.4.11 APM setting
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
Restore AC Power Loss
[Last State]
Power On By PCIE
[Disabled]
Power On By Ring
[Disabled]
Power On By RTC
[Disabled]
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set to
[Power On], the system will reboot after an AC power loss. When set to [Last State], the system
goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled]
Disables the PCIE devices from generating a wake event.
[Enabled]
Enables the PCIE devices to generate a wake event.
Power On By Ring [Disabled]
[Disabled]
Disables the Ring devices from generating a wake event.
[Enabled]
Enables the Ring devices to generate a wake event.
Power On By RTC [Disabled]
[Disabled]
Disables RTC from generating a wake event.
[Enabled]
When set to [Eanbled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced