2 removing the chassis fan – Asus AP120-E1 User Manual

Page 35

Advertising
background image

2-19

ASUS AP120-E1 user guide

3. Move the drive bay lock toward

the rear panel to secure the drive.

4. Attach the FDD power and signal

cables to the connectors at the
back of the drive.

3

2.9.2 Removing the chassis fan

To remove the chassis fan:

1. Disconnect the chassis fan cable from the CHA_FAN1 connector on

the motherboard.

2. Locate and remove four chassis

fan screws at the rear panel.
Keep the screws for later use.

Hold the chassis fan with one
hand while removing the
chassis fan screws.

2

3

3. Remove the chassis fan, then set

aside.

Advertising
See also other documents in the category Asus Computer hardware: