Asus PIKE 2008/IMR - Manual (Page 36)

2-22 Chapter 2: RAID configuration
2.2.4 Viewing and Changing Device Properties
This section explains how you can use the WebBIOS CU to view and change the
properties for controllers, virtual drives, and drives.
WebBIOS allows you to view information for the LSI SAS controller. To view the
properties for the controller, click Controller Properties on the main WebBIOS
screen. There are three Controller Properties screens. The following figure shows
the first screen.
The information on this screen is read-only and cannot be modified directly. Most
of this information is self-explanatory. The screen lists the number of virtual drives
that are already defined on this controller, plus the number of drives connected to
the controller.
Click Next to view the second Controller Properties screen, as shown in the
following figure.