Asus P/I-AP55TV - Manual (Page 65)

ASUS P/I-AP55TV User's Manual 59
VI. V
ideo Installation
(Utilities Install)
VI. Video Driver Installation
Utilities Installation
Windows 3.x, AutoCAD, Microstation
NOTE: The INSTALL program must be run in DOS mode. It cannot run in a
Windows DOS shell or prompt. You must complete the Utilites Installation
before using the driver installation.
Installation Procedures:
1. Turn on the monitor, then the computer.
2. Enter DOS mode (C:\ prompt) environment.
3. Insert the CD and type (assuming your CD-ROM drive is letter D), type:
D: <Enter>
CD\ <Enter>
INSTALL <Enter>
(or) D:\OTHERS\JAPANESE\INSTALL <Enter>
4. Choose Utilities Installation and press <Enter>.
5. Press <Enter> for the default path when you are prompted.
6. After the installation is completed, you will be prompted to allow changes to
your autoexec.bat file. Enter <Y> to accept changes.
7. Exit to DOS by pressing <ESC> & <Y> .
OS/2 & OS/2 Warp
Substitute these procedures for numbers 2-3 above:
1. Start OS/2
2. Check that OS/2 is using a standard VGA driver and no other applications are
running.
3. Double-click the OS/2 System folder.
4. Double-click the Command Prompts folder.
5. Double-click the OS/2 Full Screen object.
6. Insert the installation CD into the CD-ROM drive
7. Type D:\OTHERS
8. Type OS2INST