Asus AP1600R-E2(CS3) - Manual (Page 31)

2 - 1 3 2 - 1 3 2 - 1 3 2 - 1 3 2 - 1 3 A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 ) A S U S A P 1 6 0 0 R - E 2 ( C S 3 )
2.5.2 2.5.2 2.5.2 2.5.2 2.5.2 Installing a long expansion card Installing a long expansion card Installing a long expansion card Installing a long expansion card Installing a long expansion card
To install a long expansion card:
1. Follow steps 1 to 3 in “2.5.2
Installing a short expansion
card.”
2. Press the end of the plastic long
card lock, then pull it up.
5. Install the riser card bracket with
the card into the PCI-X slot on
the motherboard.
6. Make sure that the golden
connectors completely fit the
slot and the bracket aligns with
the rear panel.
3. Connect a card extension to the
long card using two screws.
(This card extension usually
comes with the card package).
4. Install the long PCI-X card to the
bracket as shown, then secure
the card with a screw.
Card extension