Asus PCH-DL User Manual

Page 46

Advertising
background image

2-28

Chapter 2: Hardware information

8. Chassis intrusion connector (4-1 pin CHASSIS1)

This lead is for a chassis designed with intrusion detection feature.
This requires an external detection mechanism such as a chassis
intrusion sensor or microswitch. When you remove any chassis
component, the sensor triggers and sends a high-level signal to this
lead to record a chassis intrusion event.

By default, the pins labeled “Chassis Signal” and “Ground” are shorted
with a jumper cap. If you wish to use the chassis intrusion detection
feature, remove the jumper cap from the pins.

PCH-DL

PCH-DL Chassis Intrusion Connector

CHASSIS1

(Default)

+5VSB_MB

Chassis Signal

GND

PCH-DL

PCH-DL IEEE-1394 Connector

IEEE1394_1

1

TP

A0-

GND

TPB0-

+12V

GND

TP

A0+

GND

TPB0+

+12V

9. IEEE 1394 connector (10-1 pin IEEE1394_1)

This connector is for a 1394 module. Attach the 10-1 pin 1394 cable
plug from the module to this connector. You may also connect a 1394-
compliant internal hard disk to this connector.

Advertising