119 specifications – Canon 550 EX User Manual

Page 119

Advertising
background image

119

Specifications

Flash-ready indication:

(1) Red pilot lamp indicates normal flash ready.
(2) Yellow pilot lamp indicates quick flash ready.

AF-assist beam linkage and range:

Linked to area AF (45 focusing points), effective from approx. 0.6 to 10
meters / 2 to 33 feet at the center and 0.6 to 5 meters / 2 to 16 feet along
the periphery (in total darkness).

Wireless functions

Transmission system: Optical pulse transmission
Configuration:

Camera, master unit, and slave unit(s)

Wireless switchover:

With wireless selector

Wireless selector positions:

OFF, Master, Slave

Channels:

4

[Master unit]
Transmission angle:

Horizontal: Approx. 80° / Vertical: Approx. 60° (At

zoom setting)

(Manual zooming of flash head also enabled)

Transmission range:

Indoors: Approx. 12 to 15 meters / 39.3 to 49.2 feet
Outdoors: Approx. 8 to 10 meters / 26.2 to 32.8 feet

No. of transmissions: Approx. 1500 (without master unit firing)
Controllable slaves:

A, B, C (3 groups)

Flash control:

(1) E-TTL autoflash (with Type-A cameras)

High-speed sync (FP flash) / FE lock / flash exposure compensation /
FEB / flash ratio control

(2) Manual flash (with Type A and B cameras)
(3) Stroboscopic flash (with Type A and B cameras)

Flash ratio control:

A:B = 8:1 to 1:1 or 1:1 to 1:8 (In thirteen 1/2-stop increments)
(For C, flash exposure compensation can be set up to ±3 stops in 1/3 or
1/2-stop increments.)

Master flash:

ON/OFF possible (When ON, automatic set as slave unit A.)

[Slave unit]
Reception angle:

Horizontal: Approx. 80° / Vertical: Approx. 80°

Flash coverage:

Set automatically to

(Manual zooming of flash head also enabled)

Flash-ready indication: AF-assist beam emitter blinks
Flash modes:

(1) Controlled automatically by master unit.
(2) Manual flash and stroboscopic flash settable independently from master

unit.

Flash exposure compensation:

Settable individually with each slave unit up to ±3 stops in 1/3- or 1/2-stop
increments.

Slave Operation Confirmation:

Enabled with master unit's test firing button.

08. F073-E (99~) 02.4.1 2:16 PM Page 119

Advertising