Asus AP7500 - Manual (Page 9)

AP7500 Hardware Reference Guide 9
I. Introduction
Features
Features
The following are highlights to this server’s many features. For additional
features and details, read the motherboard User’s Manual included with this
server package.
• Processor: Dual Intel Pentium II processors provide up to 450MHz on
each processor for extreme server processing speeds.
• Memory: Four DIMM slots with up to 1GB EDO or SDRAM with ECC.
• Onboard IDE: Up to 33MB/sec IDE transfer with UltraDMA/33.
• Chipset: Intel 440BX supports up to 100MHz front side bus.
• Onboard VGA: Onboard S3 Trio64V2/DX with 1-2MB memory.
• Onboard LAN: Onboard Intel 10/100Base-TX Fast Ethernet.
• Onboard SCSI: Three onboard connectors to independently connect
68-pin Ultra2 SCSI devices, 68-pin Wide-SCSI devices, and 50-pin Nar-
row-SCSI devices.
• SCSI Backplane: Wide-SCSI backplane with remote SCSI ID dip
switches and power to support up to 8 wide-SCSI hard disk drives.
• Redundant Power: Dual 400W current-sharing power modules pro-
vide added life and increased up-time for your server.
• Device Bays: Support one floppy, one CD-ROM, two additional fixed
devices, and eight hot-swap hard disk drives.
• Onboard Hardware Monitor: Provides information for system and
processor voltages, fan speed, temperature, chassis intrusion, and pro-
vides automatic system restart.
• SNMP Agent and Intel LDSM: Provides server monitoring, manage-
ment, and control.
I. Introduction