Asus ASMB5-iKVM - Manual (Page 28)

2-10 Chapter 2: Installation
2.4.3 System Event Log
Allows you to view all the events in the BMC event log. It will take a maximum of 15
seconds to read all the BMC SEL records.
SEL Components [Disabled]
Allows you to enable or disable all features of system event log during
booting.
The following items become configurable when you set SEL Components to
[Enabled].
Erase SEL [No]
Allows you to select how to erase SEL.
Configuration options: [No] [Yes, On next reset] [Yes, On every reset]
When SEL is Full [Do Nothing]
Allows you to select what to do to a full SEL.
Configuration options: [Do Nothing] [Erase Immediately]
Log EFI Status Codes [Both]
Allows you to customize the EFI status codes.
Configuration options: [Disabled] [Both] [Error code] [Progress code]
: Select Screen
: Select Item
Enter: Select
+/—: Change Opt.
F1: General Help
F9: Optimized Defaults
F10: Save ESC: Exit
Version 2.01.1204. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.
Server Mgmt
Enabling/Disabling Options
SEL Components
[Disabled]
Erasing Settings
Erase SEL
[No]
When SEL is Full [Do Nothing]
Custom EFI Logging Options
Log EFI Status Codes
[Both]
NOTE: All values changed here do not take effect
until computer is restarted.
Select to configure LAN channel
parameters statically or
dynamically(DHCP). Do nothing
option will not modify any BMC
network parameters during BIOS
phase.