Asus P9D-C/4L - Manual (Page 48)

2-28 Chapter 2: Hardware information
4. RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when you create
disk arrays. Place the jumper caps over pins 2–3 to use the Intel ® Rapid Storage
Technology.
5. Platform Enviromental Control Interface Setting (3-pin PECI1)
When an ASMB7-iKVM is installed, set these to pins 2-3 for correct sensor information
of the Platform Environmental Control Interface (PECI). Set to pins 1-2 if ASMB7-iKVM
is not installed.
P9D-C/4L
®
P9D-C Series RAID setting
RAID_SEL1
3ͬͩ Party
(Default)
Intel
1 2 2 3