Asus PRL-DLS - Manual (Page 42)

2-14 Chapter 2: Hardware information
2.7 Switches and jumpers
2.7.1 Switches
The following figure shows the location and default settings of the DIP
switches on the motherboard.
PRL-DLS ®
PRL-DLS DIP Switches
SW2
1. Reserved
2. Reserved
3. Reserved
4. Reserved
5. Frequency Multiple
6. Frequency Multiple
7. Frequency Multiple
8. Frequency Multiple
ON 12345678
OFF ON
Keep the default settings for stable system operation.
PRL-DLS ®
PRL-DLS CPU
External Frequency Selection
(Default)
533MHz 400MHz
3
2
1
2
ON 12345 ON 12345
SW1
JFSB1
533MHz 400MHz
1. CPU External Frequency Selection (SW1 & JFSB1)
This option tells the clock generator which frequency to send to the CPU,
SDRAM and AGP clock, and sets the CPU’s External frequency. (The BUS
Clock multiplied by the Frequency Multiple equals the CPU’s Internal
frequency, or, the advertised CPU speed.)
Both the dip switch and jumper must be set together.