Asus M4N98TD EVO - Manual (Page 78)

3-22 Chapter 3: BIOS setup
Chapter 3
3.7 Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
3.7.1 Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend.
[S1 (POS) only] Sets the ACPI suspend mode to S1/POS (Power On Suspend).
[S3 only]
Sets the ACPI suspend mode to S3/STR (Suspend To RAM).
[Auto] The system automatically configures the ACPI suspend mode.
3.7.2 ACPI 2.0 Support [Enabled]
[Disabled] The system will not add additional tables as per ACPI 2.0 specifications.
[Enabled] The system adds additional tables as per ACPI 2.0 specifications.
3.7.3 ACPI APIC Support [Enabled]
[Disabled] The system disables the Advanced Configuration and Power Interface
(ACPI) support in the Advanced Programmable Interrupt Controller (APIC).
[Enabled] The ACPI APIC table pointer is included in the RSDT pointer list.
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
BIOS SETUP UTILITY
Main Ai Tweaker Advanced Power Boot Tools Exit
Select the ACPI state
used for System
Suspend.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Suspend Mode [Auto]
ACPI 2.0 Support [Enabled]
ACPI APIC Support [Enabled]
APM Configuration
Hardware Monitor
USB 2.0 Controller Mode [HiSpeed]
[FullSpeed] Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).
[HiSpeed] Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).