Asus Striker Extreme - Manual (Page 155)

ASUS Striker Extreme 5-37
2. Select RAID 1 then press
<Enter> to display the
following.
MAIN MENU
Auto configuration
Manual configuration
c. The selection bar moves to the
Physical Drive menu Using the up
or down arrowkeys, select a drive
then press <Enter> to set the first
drive of the RAID set.
d. Repeat step c to set the
second, third, and fourth drive. The
number of available drives depend
on the installed and enabled
physical drives in the system.
TIP: For server systems, we recommend using a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
Creating a RAID 1 set (Mirrored)
To create a RAID 1 set:
1. From the Silicon Image
configuration utility main
menu, select Create RAID
set then press <Enter>.
The following sub-menu
appears.
MAIN MENU
Create RAID set
Delete RAID set
Rebuild Raid1 set
Resolve Conflicts
Low Level Format
Logical Drive Info
RAID0
RAID1
RAID10
SPARE DRIVE
RAID0
RAID1
SPARE DRIVE
CONCATENATION
e. The utility prompts a message to input the RAID size, use the up or
down arrow keys to set the RAID size then press <Enter>.
f. Press <Y> to confirm or <N> to return to the Main Menu.