Asus Striker Extreme - Manual (Page 97)

ASUS Striker Extreme 4-27
F1:Help ↑↓ : Select Item -/+: Change Value F5: Setup Defaults
ESC: Exit →←: Select Menu Enter: Select SubMenu F10: Save and Exit
Select Menu
Item Specific Help
Onboard Device Configuration
IDE Function Setup
Serial-ATA Configuration
HD Audio [Auto]
Front Panel Support Type [AC97]
Onboard 1st nVidia LAN [Enabled]
Onboard 2nd nVidia LAN [Enabled]
Onboard LAN Boot ROM [Disabled]
Silicon SATAII Controller [SATA Mode]
Onboard 1394 [Enabled]
LCD Poster Backlight [Disabled]
LCD Poster Mode [Current Time]
x LCD Poster String
Internal Connector LED [by Switch]
Phoenix-Award BIOS CMOS Setup Utility
Advanced
4.5.3 Onboard Device Configuration
IDE Function Setup
This sub-menu contains IDE function-related items. Select an item then press
<Enter> to edit.
Select Menu
Item Specific Help
Phoenix-Award BIOS CMOS Setup Utility
Advanced
IDE Function Setup
OnChip IDE Channel0 [Enabled]
IDE DMA transfer access [Enabled]
IDE Prefetch Mode [Enabled]
OnChip IDE Channel0 [Enabled]
Allows you to enable or disable the onchip IDE channel 0 controller .
Configuration options: [Disabled] [Enabled]
IDE DMA transfer access [Enabled]
Allows you to enable or disable the IDE DMA transfer access.
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Enabled]
Allows you to enable or disable the IDE PIO read prefetch mode.
Configuration options: [Disabled] [Enabled]