AEG HE634200XB - Manual (Page 23)

sensor field function
4 To lock / unlock the control panel.
5 To activate the Power function.
6 To activate and deactivate the STOP
+GO function.
7 A heat setting display It shows the heat setting.
3.3 Heat setting displays
Display Description
The cooking zone is deactivated.
- The cooking zone operates.
The function operates.
The Automatic Heat Up function operates.
Power function operates.
+ digit There is a malfunction.
/ / OptiHeat Control (3 step Residual heat indicator) : con-
tinue cook / stay warm / residual heat.
Lock / The Child Safety Device operates.
Not correct cookware or too small or no cookware on
the cooking zone.
The Automatic Switch Off function operates.
3.4 OptiHeat Control (3 step
Residual heat indicator)
WARNING!
\ \ The risk of burns
from residual heat!
OptiHeat Control shows the level of the
residual heat. The induction cooking
zones make the heat necessary for cook-
ing directly in the bottom of the cook-
ware. The glass ceramic is hot from the
heat of the cookware.
4. DAILY USE
You operate the hob with the knobs
of the oven and control panel of the
hob. The Operating Instructions chap-
ter for the oven tells how to operate
the knobs.
When a cooking zone operates,
it hums for a short time. This is
typical of all ceramic glass cook-
ing zones and does not show
that the appliance operates in-
correctly.
4.1 Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated (
).
• You do not set the heat setting after
you activate the appliance.
• You spill something or put something
on the control panel for more than 10
seconds, (a pan, a cloth, etc.). An
acoustic signal sounds some time and
ENGLISH
23