AEG HE634200XB - Manual (Page 25)

of the cooking zone start to flash slow,
the time counts down.
• To see the remaining time: set the
cooking zone with . The indicator
of the cooking zone starts to flash
quickly. The display shows the remain-
ing time.
• To change the Count Down Timer:
set the cooking zone with . Touch
or .
• To deactivate the timer: set the
cooking zone with . Touch . The
remaining time counts back to
00
.
The indicator of the cooking zone
goes out. To deactivate you can also
touch
and at the same time.
When the countdown comes to an
end, the sound operates and
00
flash-
es. The cooking zone deactivates.
• To stop the sound: touch
CountUp Timer ( The count up
timer)
Use the CountUp Timer to monitor how
long the cooking zone operates.
• To set the cooking zone (if more
than 1 cooking zone operate ) :
touch
again and again until the in-
dicator of a necessary cooking zone
comes on.
• To activate the CountUp Timer:
touch of the timer comes on.
When the indicator of the cooking
zone starts to flash slow, the time
counts up. The display switches be-
tween
and counted time (minutes).
• To see how long the cooking zone
operates: set the cooking zone with
. The indicator of the cooking zone
starts to flash quickly. The display
shows the time that the cooking zone
operates.
• To deactivate the CountUp Timer:
set the cooking zone with and
touch or to deactivate the timer.
The indicator of the cooking zone
goes out.
Minute Minder
You can use the timer as a Minute Mind-
er while the appliance is activated and
the cooking zones do not operate (the
heat setting display shows
).
• To activate the Minute Minder:
Touch . Touch or of the timer
to set the time. The display of the
cooking zones deactivates automati-
cally after 10 seconds. When the time
comes to an end, the sound operates
and
00
flashes.
• To stop the sound: touch .
• To deactivate the Minute Minder:
Activate and deactivate the left front
cooking zone for a short time.
The Minute Minder function has no ef-
fect on the operation of the cooking
zones.
4.6 STOP+GO
The function sets all cooking zones
that operate to the Keep Warm setting (
).
The function does not stop the timer
function.
• To activate this function touch
.
The symbol comes on.
• To deactivate this function touch
.
The heat setting that you set before
comes on.
When you change the heat set-
tings, the function stops and the
displays show the new heat set-
tings.
4.7 Lock
You can lock the sensors on the hob
when the cooking zones operate.
First set the heat setting.
To activate this function touch
. The
symbol comes on for 4 seconds.
The Timer stays on.
To deactivate this function touch
.
The heat setting that you set before
comes on.
When you change the heat setting, you
deactivate this function.
When you deactivate the appliance, you
also deactivate this function.
ENGLISH
25