Asus P8B-E/4L - Manual (Page 111)

ASUS P8B-E/4L 5-21
Using the �bjects command
To check data consistency using the �bjects command
1. From the Management Menu, select �bjects, and then select Virtual Drive
from the sub-menu.
2. Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
3. Select Check Consistency from the pop-up menu, and then press <Enter>.
4. When prompted, use the arrow keys to select Yes from the dialog box to
check the drive.
5. When checking is complete, press any key to continue.