Asus H81I-PLUS User Manual

Page 48

Advertising
background image

2-20

Chapter 2: Getting started

CPU Internal Power Switching Frequency

Frequency Tuning Mode [Auto]

Allows you to set the frequency tuning mode. Configuration options: [Auto]

[+] [-]

CPU Internal Power Fault Control

Thermal Feedback [Auto]

When enabled, it allows CPU to take precautionary actions when the

thermal of the external regulator exceeds the limit.Configuration options:

[Auto] [Disabled] [Enabled]
CPU Integrated VR Fault Management [Auto]

Allows you to manage the CPU Integrated VR fault. Configuration options:

[Auto] [Disabled] [Enabled]

CPU Internal Power Configuration

CPU Integrated VR Efficiency Management [Auto]

Allows you to manage the CPU integrated VR efficiency. Configuration

options: [Auto] [High Performance] [Balanced]
Power Decay Mode [Auto]

Enable to improve power saving on the Fully Integrated Voltage Regulator

as the processor enters low current mode. Configuration options: [Auto]

[Disabled] [Enabled]

Idle Power-in Response [Auto]
Allows you to set the idle power-in response. Configuration options: [Auto] [Regular]

[Fast]
Idle Power-out Response [Auto]
Allows you to set the idle power-out response. Configuration options: [Auto] [Regular]

[Fast]
Power Current Slope [Auto]
Allows you to set the power current slope. Configuration options: [Auto] [Level -4] ~

[Level 4].
Power Current Offset [Auto]
Allows you to set the power current offset. Configuration options: [Auto] [100%] [87.5%]

[75%] [62.5%] [50%] [37.5%] [25%] [12.5%] [0%] [-12.5%] [-25%] [-37.5%] [-50.0%]

[-62.5%] [-75%] [-87.5%] [-100%]
Power Fast Ramp Response [Auto]
Allows you to increase to enhance the response of the voltage regulator during the

load transient. Configurations: [Auto] [0.00] - [1.50].
CPU Internal Power Saving Control

Power Saving Level 1 Threshhold [Auto]

Allows you to set the power saving level 1 threshhold.
Use the <+> and <-> keys to adjust the value.

CPU Integrated VR Current Limit [Auto]

Allows you to limit the CPU Integrated VR current
Use <+> and <-> key to adjust the value.

Advertising