Asus RS700-X7/PS4 - Manual (Page 38)

Chapter 2: Hardware setup 2-20
2.8.2 Installing ASUS PIKE RAID card (optional)
Follow the steps below to install an optional ASUS RAID card on your motherboard.
1. Locate the PIKE RAID card slot on
the motherboard, then remove the
screw beside the PIKE1 slot.
2. Align the golden fingers of the
RAID card with the PIKE RAID card
slot then insert the RAID card into
the PIKE RAID card slot.
Ensure that it is completely seated
on the PIKE RAID card slot.
3. Secure the PIKE card with the
screw that you removed earlier.
4. Remove the SATA/SAS cables from
the onboard SATA1–4 connectors.
and connect them to the onboard
PSAS1–4 connectors (blue).
5. Move the SGPIO_SEL1 jumper on
the SATA/SAS backplane to 2–3.