Asus A8V-MX - Manual (Page 20)

1 - 1 0 1 - 1 0 1 - 1 0 1 - 1 0 1 - 1 0 C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n C h a p t e r 1 : P r o d u c t i n t r o d u c t i o n
1.7 System memory
1.7.1 1.7.1 1.7.1 1.7.1 1.7.1 Overview Overview Overview Overview Overview
The motherboard comes with four 184-pin Double Data Rate (DDR) Dual
Inline Memory Modules (DIMM) sockets.
The following figure illustrates the location of the sockets:
1.7.2 1.7.2 1.7.2 1.7.2 1.7.2 Memory configurations Memory configurations Memory configurations Memory configurations Memory configurations
You may install 128 MB, 256 MB, 512 MB, and 1 GB unbuffered ECC/
non-ECC DDR DIMMs into the DIMM sockets using the memory configurations
in this section.
• Installing DDR DIMMs other than the recommended configurations
may cause memory sizing error or system boot failure. Use any of
the recommended configurations on the next page.
• Install only identical (the same type and size) DDR DIMM pairs for
each channel.
• Always install DIMMs with the same CAS latency. For optimum
compatibility, it is recommended that you obtain memory modules
from the same vendor.
• Due to chipset limitation, this motherboard does not support DIMM
modules with less than or equal to 128 Mb memory chips.
A8V-MX
¤
A8V-MX 184-pin DDR DIMM sockets
DIMM_A1 DIMM_B1