Air Suspension C-2527 Rev 4 - Manual (Page 2)

2 C-2527 REV 4
03/07/14
Additional hardware needed, not supplied- hardware to cap the AHC lines.
*Removal and installation is only to be performed by fully qualified personnel.
*CAUTION: Damage to the vehicle and shock assembly can be incurred if work is
carried out in a manner other than specified in the instructions or in a different sequence.
COIL SPRING AND REAR SHOCK ABSORBER REMOVAL/INSTALLATION:
Kit Contains:
PARTS LIST
P/N QTY DESCRIPTION
21-5126 2 REAR SHOCK
14-3936 2 REAR COIL SPRINGS
21-5126 14-3936
Air Shock Removal/Installation:
The ignition must remain switched off during the shock removal and replacement.
Use lifting platform (hoist) that is capable of raising the body separately from the
wheels, lift body at the lifting points prescribed by the vehicle manufacturer.
Vehicle slippage can cause danger to life and limb.
1.0
Raise vehicle.
2.0
Remove rear wheels.
NOTE:
Refer to Figure B for steps 3.0- 9.0 (air shock removal and installation).