Air Suspension C-2532 Rev 2 - Manual (Page 5)

5 C-2532RR REV 2 3/13/13
Front Shock Installation:
WARNING: Before disassembling the front suspension refer to the vehicle
remanufacturer’s Service Manual for proper procedures. Failure to heed to this warning could
result in vehicular damage and serious bodily injury.
PARTS LIST
P/N QTY DESCRIPTION
29- 4121 2 SHOCK ABSORBERS, FRONT
29- 4121
Removal:
1.0 Raise and support the vehicle.
2.0 If equipped with selectable ride, disconnect the Real Time Damping (RTD) link rod
from the sensor. Grasp the connector lock tabs. Rotate the connector lock tabs (1)
and (2) counter-clockwise until the connector is unlocked. Disengage the
connector from the tennon by firmly pulling the connector up. Hold the tennon end
with a wrench while removing the nut. Remove the nut.