Air Suspension C-2532 Rev 2 - Manual (Page 6)

6 C-2532RR REV 2 3/13/13
FIGURE 10-2
3.0 Remove the upper insulator.
4.0 Remove the shock absorber mounting bolts at the lower control arm. Remove the
shock absorber through the lower control arm from below. (FIGURE 10-3)
FIGURE 10-3
Installation:
1.0 Support the lower control arm with a suitable jack in order to align the tennon with
the mounting hole if equipped with selectable ride.
2.0 Install shock absorber through the lower control arm from below .
3.0 Connect tennon through the mounting hole in the upper spring pocket .
4.0 Align the shock absorber with the mounting hole in the lower control arm.
5.0 Install shock absorber mounting bolt to the lower control arm. Tighten to
manufacturer’s specifications.