Air Suspension P-2210 - Manual (Page 2)

Page 2 of 6
Compressor Removal/Installation:
THE COMPRESSOR IS LOCATED ON THE VEHICLES PASSENGERS SIDE BEHIND THE
FRONT BUMPER AND CAN BE ACCESSED BY REMOVING THE FRONT BUMPER
COVER.
1.0
Turn suspension switch off.
2.0
Remove front bumper cover as follows:
2.1 Remove front side marker/cornering lamp.
2.2 Remove the radiator upper sight shield (Figure A).
Figure A
NOTE: Refer to Figure B for steps 1.3-1.11.
2.3 Remove the radiator grille opening panel moulding across the top of the
headlamps and front bumper cover.
2.4 Remove six screws (three each side) attaching front bumper cover to right and
left front fender splash shields at the front fender wheel opening.
REV 2