Air Suspension P-2210 - Manual (Page 3)

Page 3 of 6
2.5 Remove four screws (two each side) attaching bottom of front bumper cover to
right and left front fender splash shields.
2.6 Remove four nuts (two each side) through front side marker/cornering lamp
openings attaching front bumper cover to front fenders.
2.7 Remove two bolts attaching radiator grille opening panel brackets to radiator
grille opening reinforcement.
2.8 Remove one screw attaching bottom center of front bumper cover to “Z” brace.
2.9 Remove four pushpins attaching bottom of front bumper cover to radiator grille
opening panel reinforcement.
2.10 Carefully pull front bumper cover and radiator grille away from vehicle.
2.11 Remove one rivet and “Z” brace from bottom of radiator grille opening panel
reinforcement.
Figure B
REV 2