Operating instructions – Armasight NRWVULCAN439DB1 Vulcan 4.5X Gen3 Bravo MG - Compact Professional 4.5x Night Vision Rifle Scope User Manual
Page 18
18
3
OPERATING INSTRUCTIONS
3.1 INSTALLATION AND MOUNTING
CAUTION
:
In order to protect the intensifier tube, always keep the protective lens cap securely fitted over
the lens if the sight is not in use or you are operating the device in daylight.
3.1.1 VULCAN BATTERY INSTALLATION
CAUTION
:
Before installing a battery, verify that the device is OFF.
To install the battery, do following (refer to Figure 3-1):
1. Unscrew the battery cap (A) and check the position of the battery adapter (B). See Figure 3-2 for the
correct positioning of the threaded battery adapter, which changes depending on the battery being
installed.
2. If necessary, use the special wrench to change the battery adapter’s position in the cap.
3. Install the battery (C) into the battery compartment (D). Follow the battery symbol (E).
4. Replace the battery cap (A).
c
B
a
D
E
FIGURE 3-1. VULCAN BATTERY INSTALLATION