Armasight NRWVULCAN439DB1 Vulcan 4.5X Gen3 Bravo MG - Compact Professional 4.5x Night Vision Rifle Scope - Manual (Page 3)

3
WARNING:
This product contains natural rubber latex which may cause allergic reactions! The FDA
has reported an increase in the number of deaths that are associated with an apparent sensitiv-
ity to natural latex proteins. If you are allergic to latex, it is a good idea to learn which products
contain it and strictly avoid exposure to those products.
WARNINGS:
• When installing the equipment on a weapon, be sure the weapon is clear and that the safety
is ON before proceeding.
• Armasight recommends the use of an eyecup on the scope’s eyepiece. This will allow for both
eyepiece adjustment and relief; preferably, the eyecup should include a side paddle to help
avoid detection.
• The light from the infrared illuminator is invisible to the naked eye. However, the light can be
detected by other night vision devices.
CAUTION:
• Do not dismantle the equipment.
• Keep the equipment clean. Protect it from moisture, dramatic temperature changes, and
electric shocks.
• Do not drop or hit the equipment.
• Protect the equipment from overexposure to light; do not activate the equipment in daylight
with the objective lens cap removed; do not aim the equipment at bright light sources (fire,
car headlights, lanterns, street lamps, room lights, etc.).
• Do not force the equipment controls past their stopping points.
• Do not leave the equipment on during breaks in operation.
• Verify that the equipment is off before installing a battery.
• Do not store the equipment with the battery still inserted.
• Clean and dry each item thoroughly before placing them into the storage case.
NOTES:
• The equipment requires some level of ambient light (moonlight, starlight, etc.) to function
correctly.
• Performance of the device in nighttime conditions depends on the level of ambient light in
the environment. Please remember the following:
— The level of ambient light is reduced by the presence of clouds, shade, or objects that
block natural light (trees, buildings, etc.).
— The equipment is less effective when operated in shadows and other darkened areas.
— The equipment is less effective when operated in rain, fog, sleet, snow, dust or smoke.
— The equipment will not “see” through dense smoke.
• Retain all packaging materials in case any defective components need to be returned.