Armasight DKMPRIMDB030001 Prime D 3x Digital Night Vision Monocular - Manual (Page 7)

7
5. MAInTEnAncE PROcEDuRES
The Prime D should always be stored in the supplied packaging, particularly in heated and ventilated
rooms. To keep the device operational, please follow the instructions listed below regarding prepara-
tions for storage. The battery should be stored separately from the unit and be inserted into the battery
compartment only when the device is being prepared for use. The presence of both acids and alkalis’
near the monocular is not recommended.
When stored, your Prime D should be protected from exposure to direct sunlight or extreme tempera-
tures.
MOnOculAR clEAnIng PROcEDuRES
1) Gently remove any dirt from the monocular’s body using a clean, soft cloth.
2) Wipe external surfaces down (with the exception of optical surfaces) with a clean cloth moistened
with pure water.
3) Dry all wet surfaces with a different clean, dry cloth.
4) Carefully remove any dirt from the optical surfaces using a lens brush.
5) To avoid scratches, optical surfaces must be cleaned using a clean cotton swab that has been slight-
ly dampened with pure alcohol. The glass should be wiped in circular motions starting from the center
and moving out towards the edge, without touching the barrel. Change the cotton swab as soon as it
becomes dirty.
PREPARATIOn FOR STORAgE
When preparing your Prime D for storage, perform the following steps:
1) Verify that the monocular is operating in accordance with all previously specified procedures.
2) Remove the batteries from the battery compartment.
3) Clean the monocular and all accessories.
4) Place all components into the storage case.
cAuTIOn:
Each component of the unit should be thoroughly dried before placing them into the storage
case.
6. TROublESHOOTIng
Common problems that may occur with your monocular or the detection and viewing tests, as well as
actions you can take to correct them, are listed in the Troubleshooting Table, below. This table does
not list all of the malfunctions that may occur with your device. If you experience a malfunction of
the device that is not listed in this table, please contact Armasight or your Prime D retailer.
nOTE:
Before you use this table, be sure you have performed all normal operational safety, care and
handling checks and procedures. If you have a malfunction which is not listed in this table,
notify the next higher level of maintenance.