AVSL 160.457 QTFX2000 - Manual (Page 7)

User Manual – QTFX-2000 160.457UK
10
13. Timer Controller :
1) Power indicator LED
2) Output indicator LED
3) Set time interval between output (Zero = Timer off)
4) Set the duration the smoke is released for.
5) Timer activated indicator (flashing)
6) Smoke machine at temperature and ready to operate LED
7) Output smoke volume
8) Manual override button
User Manual – QTFX-2000 160.457UK
7
9. Replacing Fuse :
Disconnect from the main power supply first, then remove the fuse holder
above the IEC Socket to reveal the fuse. Replace the correct fuse rating as
stated on lighting or user guide. Then, lock the fuse holder cover back into
place.
10. General Maintenance :
To maintain optimum performance and minimize wear, the item should be
cleaned frequently. Usage and environment are contributing factors in
determining frequency. As a general rule, fixtures should be cleaned after
use to avoid dust build-up and blockages, which can result in poor
performances, overheating and breakages. Be sure to power off fixture
before conducting maintenance.
Unplug fixture from power. Use a vacuum or air compressor and a soft
brush to remove dust collected on external vents and internal components.
Clean the external case when the fixture is cold with a dry cloth or tissue,
and drag dirt and grime to the outside case.
To ensure a continuing high performance it is recommended to use water
or smoke cleaning fluid (160.670) to clean the internal workings. Simply
empty the tank of any smoke fluid. Fill with water or smoke cleaning fluid
then operate two full cycles to clean the internal pipes this should be done
once every 2 months to ensure continuing high performance