AVSL 154.009 SL-FC3, SL-36, SL-64, SL-SW, SL-Q8, SL-Q12 - Manual (Page 4)

SmartLIGHT User Manual Page 4
CAUTION! : TO PREVENT RISK OF ELECTRIC SHOCK AND ENSURE CORRECT USAGE
For your safety, please kindly pay attention to all of the warnings listed below:

Always plug in the power plug last and disconnect from the mains, when the
device is not in use or before cleaning.

Do not install and operate the device in rain or extreme heat, moisture or dusty
environments.

This device is for indoor use only and in a dry environment.

Do not switch on immediately but wait until it reaches to room temperature, if
the device has been exposed to drastic temperature fluctuations.

Do not shake the device and avoid brute force when installing or operating.

Do not point a fog or bubble effect machine directly at the device.

Do not use the device during thunderstorms. Disconnect the power.

Do not use solvents or aggressive detergent to clean the device. Use a soft and
clean cloth.

Do not modify the device or the power cord in anyway.

Use appropriate safety-rope for added safety.

Do not stare to the light.
 The symbol determines the minimum distance from lighted objects. The
minimum distance between light-output and the illuminated surface must be
more than 0.5m.