AVSL 154.009 SL-FC3, SL-36, SL-64, SL-SW, SL-Q8, SL-Q12 - Manual (Page 6)

SmartLIGHT User Manual Page 6
GENERAL MAINTENANCE
To maintain optimum performance and minimise wear, fixtures should be cleaned
frequently. Usage and environment are contributing factors in determining frequency.
As a general rule, fixtures should be cleaned at least twice a month. Dust build-up
reduces light output performance and can cause overheating. This can lead to
reduced life and increased mechanical wear. Be sure to power off the fixture before
conducting maintenance.
Unplug fixture from the mains and use a vacuum or air compressor and a soft brush
to remove dust collected on external vents and internal components. Clean all glass
and Perspex when fixture is cold with a mild cleaning solution on the cloth or tissue,
and drag dirt and grime to the outside of the lens. Gently polish optical surface until
they free of haze and lint.
The cleaning of external optical lenses must be carried out periodically to optimise
light output. Cleaning frequently depends on the environment in which the fixture
operates: damp, smoky or particularly dirty surroundings can require cleaning fluid.
Always dry the parts carefully. Clean the external optics at least every 20 days.