Babyliss G920E Homelight Face & Body - Manual (Page 150)

EN
152
Power level intensity
The power level intensity determines the power of the pulsed light administered into the skin during the
treatment, ranging from the lowest (-) to the highest (+). The corresponding power level indicator lights
on the control panel indicate the selected power level. By increasing the power, you will achieve better
results, but you will also increase the risk of side effects (cf. ‘Possible side effects’ below).
Always use the lowest power setting (one indicator light at ‘-’) the first time you use your Homelight
epilator.
If during or after your first depilation session, you feel little or no discomfort, you can increase the power
by one increment in your next session. You will see the corresponding indicator light light up and you can
repeat this step in the following session if you wish.
Note: After having changed the replaceable flash lamp, always turn the power level one notch lower
than usual. Return to your usual power level only if you experience no adverse effects during or after
your treatment.
When your appliance is on, its intensity level will automatically be positioned by default at the lowest
intensity level. A single power level indicator light will be lit. To adjust the intensity light to the desired
level, either higher or lower, press the power intensity regulator using the ‘+’ or ‘-’ until the indicator
light corresponding to the intensity that you want is lit.
Do not increase the power level if you felt more discomfort than usual while using or
after having used the appliance (see ‘Possible side effects’).
Do not increase the power intensity during a session even if you have not felt any
discomfort. It is possible that you won’t feel discomfort during the treatment, but will
do after.