C2G 39973 TruLink VGA Matrix Switch w_Audio - Manual (Page 4)

1
Features:
• Route multiple PC sources to multiple monitors and speakers
• PC selection via push buttons or IR remote control
• IR remote control allows you to switch outputs from up to 6 feet away
• PC online status lights for indication of a connected PC
• Enhance video signal enhancement allows monitor to be placed up to 164 feet away
• Supports video resolutions up to 2048x1536
• Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multi-sync monitors
Connecting the VGA Matrix Switch
Examples in this manual will be with reference to product 39973 (2x2 Switch).
Connections and operation will work in the same method for 39974.
Before making the connections to the matrix switch, make sure that you have the necessary
cables to connect. No cables are supplied with the unit.
1. Using VGA and 3.5mm audio cables connect the Monitor1 and Audio1 outputs on the VGA
Matrix Switch to a monitor and set of PC type speakers.
2. Repeat step 1 for the Monitor2 and Audio2 outputs on the VGA Matrix Switch for a second
monitor and set of PC type speakers.
3. Use VGA and 3.5mm audio cables and connect the PC1 and Audio1 inputs on the VGA Matrix Switch to
your PC VGA and 3.5mm PC sound card output.
4. Repeat step 3 for the PC2 and Audio2 inputs on the VGA Matrix Switch for a second PC and PC sound
card output.
5. Connect the power supply to the DC 5V jack on the VGA Matrix Switch.