C2G 40472 HDMI 1.3 SPLITTER User Manual
Page 8
D
EVICE
I
NSTALLATION
Step 1
Make sure that your HDMI enabled device and televisions/monitors are turned off.
Step 2
Using an HDMI cable (not included), connect the HDMI output of your source device to the HDMI input
on the rear panel of the HDMI splitter.
Step 3
Using HDMI cables connect the HDMI Splitter outputs to the HDMI inputs on your televisions/monitors.
NOTE: The maximum recommended HDMI cable length connecting the source device to the HDMI
splitter is 10m. The maximum recommended HDMI cable length connecting the HDMI splitter to your
televisions/monitors is 15m. Attempting to use cables longer than the recommended length may cause
the image to flicker, become distorted or no image to appear at all. Cable quality will affect distance
between the source device, the HDMI splitter and televisions/monitors. To obtain maximum distance we
recommend using cables constructed with a larger wire gauge. For best performance, we recommend
using SonicWave™ High-Speed HDMI™ cables.
7